Bringing the vehicle to the normal position
- Only on vehicles with air spring system: Perform ride height adjustment with diagnostic system.
- Check vehicle interior and trunk (including luggage compartment well) for load status, if applicable, unload vehicle.
- Place the prescribed DIN load in the vehicle.TECHNICAL DATA SPECIFICATION
Normal load, normal position Vehicle has a full tank.
Vehicle is completely assembled.Per front seat (seats in center position) 68 kg Centered in the trunk 14 kg - Only on vehicles with air spring system:
After the vehicle has been loaded, start the engine and wait until the vehicle ride height has been adjusted.NOTE: (The doors must be closed)