1113 Engine Oil Pan (X6 M 2020-2023)
1113 TIGHTENING TORQUE OVERVIEW
| Oil drain plug on oil sump | ||
| M18x1.5 Replace the sealing ring. |
tightening torque | 40 Nm |
| Lower oil sump section | ||
| M6x25 Replace screws. |
Tightening torque | 10 Nm |
| Upper oil sump section to crankcase (M8x45) | ||
| M8x45 screw Replace screw. |
tightening torque | 24 Nm |
| Upper oil sump section to crankcase (M6x25) | ||
| M6x25 screw | Tightening torque | 10 Nm |
| Upper oil sump section to crankcase (M6x25) | ||
| M6x25 screw | Tightening torque | 10 Nm |
| Angle of rotation | 90° | |