Removing the front wheel arch trim
NOTE:
TECHNICAL INFORMATION
If the wheel arch trim is disassembled, the trim on the side panel must be replaced in all cases.
If the wheel arch trim is disassembled, the trim on the side panel must be replaced in all cases.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING THE REAR DOOR .
- Refer to REMOVING REAR WHEEL ARCH TRIM .
- Unclip wheel arch trim (1) from detents (2).
- Unclip wheel arch trim (1) from clips (2).
- Release and remove wheel arch trim (1) using special tool 0 496 569 (00 9 325) from detents (3) and adhesive tape (4).