Install the seat belt finisher strip
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Position seat belt finisher strip (3) .
- Secure expanding rivet (1) .
- Tighten the screws (2) .
Follow-up work
- Refer to INSTALLING THE BOTTOM C-PILLAR TRIM PANEL .
- Refer to INSTALLING C-PILLAR TRIM PANEL .
- Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
- Refer to INSTALLING THE FLAP IN THE LEFT LUGGAGE COMPARTMENT TRIM PANEL .
- Refer to INSTALLING THE LEFT OR RIGHT LUGGAGE COMPARTMENT LAMP .
- Refer to INSTALLING D-PILLAR TRIM PANEL .
- Refer to INSTALLING COVER OF THE SEAT BELT FINISHER STRIP .
- Refer to INSTALLING BACKREST SIDE SECTION .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to INSTALLING THE BATTERY COVER .
- Refer to INSTALLING COVER FOR THE SIDE MEMBER .
- Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to INSTALLING THE STORAGE SHELF .