1252 Plug Connections, Terminals, Loose Parts (X6 M 2020-2023)
1252 TIGHTENING TORQUE OVERVIEW
| Ground cable splitter to the cylinder head cover | ||
| M6x14 screw | tightening torque | 10 Nm |
| Cable splitter sensor system to the cylinder head cover | ||
| hexagon nut M5 | tightening torque | 5.5 Nm |
| Ground cable to hold-down device | ||
| Nut M5 | tightening torque | 5.5 Nm |
| Ground cable on cylinder head cover/ground pin | ||
| Nut M5 | tightening torque | 4.6 Nm |
| Y-cable at housing | ||
| M5 Replace screws. |
Tightening torque | 4.5 Nm |
| Wiring harness section 5-8 to the cylinder head cover | ||
| M6x16 screw | Tightening torque | 10 Nm |
| Wiring harness sensor system to the cylinder head cover | ||
| M6x16 screw | Tightening torque | 10 Nm |
| Holder on the cylinder head cover | ||
| M6x16 screw | Tightening torque | 10 Nm |