Installing the ultrasonic sensor for the Parking Maneuvering Assistant (PMA) at the front
- Correctly position the ultrasonic sensor snap in the (3) detent (1) .
- Connect connectors (2) and lock.
Follow-up work
- Refer to INSTALLING THE TRIM OF THE BUMPER COVER ON THE LEFT AND RIGHT SIDE .
- Refer to INSTALLING THE ORNAMENTAL GRILLE OF THE BUMPER PANEL ON THE LEFT AND RIGHT SIDE .
- Refer to INSTALLING THE ORNAMENTAL GRILLE ON THE CENTER BUMPER PANEL .
- Refer to INSTALLING THE TRIM ON THE FRONT BUMPER COVER .
- Refer to INSTALLING THE FOG LIGHT BRACKET ON THE LEFT AND RIGHT .
- Refer to INSTALLING THE TRIM ON THE CENTER ORNAMENTAL GRILLE .
- Refer to INSTALLING FRONT BUMPER COVER .
- Refer to INSTALLING THE FRONT PART OF THE LEFT FRONT AND RIGHT WHEEL ARCH COVER (PARTIALLY REMOVED) .
- Refer to INSTALLING THE LEFT AND RIGHT FRONT WHEEL ARCH TRIM (PARTIALLY REMOVED) .
- Refer to INSTALLING FRONT ORNAMENTAL GRILLE .
- Refer to INSTALLING THE NUMBER PLATE BASEPLATE FOR THE FRONT NUMBER PLATE .
- Refer to PUTTING THE FRONT RADAR SENSORS INTO OPERATION .