Removing the front right door sill cover strip
NOTE:
Description is for left component only. Procedure on the right side is identical.
Removing front entrance cover strip
NOTE:
RISK OF DAMAGE
Bending of plastic components .
Application of too much force can lead to bending of plastic components .
Bending of plastic components .
Application of too much force can lead to bending of plastic components .
- Place special tool directly beside the mounting clip.
- Continue unclipping the part without using the tool if possible.
- Detach the front door sill cover strip (1) upwards from the clamps (2) and clips (3) using the special tool 0 496 569 (00 9 325) .
- If applicable, disconnect the plug connection and remove the front door sill cover strip (1).