Remove engine vent line of cylinders 5 to 8

WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Hot surfaces .
Risk of burning!

Perform all work only on components that have cooled down.

Preliminary work

Refer to REMOVING THE ACOUSTIC COVER .
Refer to REMOVING LEFT INTAKE SILENCER HOUSING .
Refer to REMOVING THE LEFT INTAKE SILENCER BRACKET .
Refer to REMOVING THE SOUND INSULATION OF INJECTORS ON LEFT .

Loosen screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock the retaining clips (1) in an upward direction, using a suitable screwdriver.
Remove the intake pipe (2) in an upwards direction.
Guide out engine vent line (3) towards rear and remove.

Courtesy of BMW OF NORTH AMERICA, INC.