Install right clean air pipe
WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.
- Check sealing ring (1) of the clean air pipe (2) for damage, replace if necessary.
- Feed in clean air pipe (4) and install.
- Lock the lock (2) audibly.
- Connect engine ventilation line (3) with the clean air pipe (4) and lock it.
- Tighten clamps (1).
TIGHTENING TORQUE SPECIFICATIONS
| Clean air pipe to upper section of intake filter housing | ||
| cl. | Tightening torque | 3 Nm |
Follow-up work
- Refer to CONNECTING THE RIGHT CHARGE AIR LINE TO THE EXHAUST TURBOCHARGER .
- Refer to INSTALLING ACOUSTIC COVER .