Partially installing the front wheel arch trim (door sill) at left and right
WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform the steps on the right and left side.
Installing the front wheel arch trim on the door sill (partially removed)
- Check the clips (2)
and sealing ring for damage and, if necessary, replace them.
The sealing ring must not be damaged or missing.
- Check the detents for damage; if necessary, replace the wheel arch trim (1) .
- Position the wheel arch trim (1) and engage at the clips (2) .
- Engage the wheel arch trim (1)
at the detents along the dotted line.