Installing the wheel arch cover on the front, bottom left and right

WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Perform the steps on the left and right side.

Installing the front bottom wheel arch cover

Feed in the front bottom wheel arch cover (1) .

Tighten all bolts (arrows).

TIGHTENING TORQUES SPECIFICATION

Lower front wheel arch cover
Thermoplastic hexagon screw
	tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.