Installing the carrier plate

WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.

Insert the carrier plate (3) and position it on the centering pins (2) .

Tighten the screws (1) .

TIGHTENING TORQUES SPECIFICATION

Carrier plate to the cylinder head covers
M6x12 screw
	tightening torque	10 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Clip the purge air line (2) into the holder (1) .

Courtesy of BMW OF NORTH AMERICA, INC.