Install reinforcement strut

WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.

Position the reinforcement strut (2).
Replace the screw (1).
Parts: Screw
Screw in the screw (1) by hand force.
NOTE: Do not yet tighten the screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Replace the screw (1) .
Parts: Screw

Tighten down screw (1) .

TIGHTENING TORQUES SPECIFICATION

Reinforcement strut to engine mount
M12 Replace screw.
	Tightening torque	108 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the screw (1) at the reinforcement strut (2) .

TIGHTENING TORQUES SPECIFICATION

Reinforcement strut to front subframe
M12 Replace screw.
	Tightening torque	108 Nm

Courtesy of BMW OF NORTH AMERICA, INC.