Install left and right brake ventilation duct

WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.

Insert and install the brake ventilation duct (2) on the right.
Secure expanding rivet (1) .

Courtesy of BMW OF NORTH AMERICA, INC.
Insert and install the brake ventilation duct (2) on the left.
Secure expanding rivet (1) .

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Perform the steps on the right and left side.

Install the brake ventilation duct

Insert and position the brake ventilation duct (2) .

Tighten the screws (1) .

TIGHTENING TORQUES SPECIFICATION

Wheel arch cover
Thermoplastic hexagon screw
	Tightening torque	2.6 Nm
Plastic nut
	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.