Positioning the camshafts of cylinder bank 2

WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.

Adjust camshaft positions of bank 2.
The cams (1) must be located roughly in the illustrated position.

Ensure that the increment wheels (2) face the exhaust camshaft bearing cap and the intake camshaft bearing cap.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Description is for right component only. The procedure on the left side is identical.

NOTE: To provide a better overview: Schematic diagram with partially hidden components.

Courtesy of BMW OF NORTH AMERICA, INC.
Make sure that the ground surfaces of the camshafts (1) point upward.
Ensure that the rounded surfaces (1) point downwards to the cylinder head.
Check timing again and assess.