Installing the right-hand engine ventilation line and the crankcase ventilation intake pipe
WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.
- Check the sealing rings (1)
of the engine ventilation line (2)
for correct placement and for damage, and replace if necessary.
- Mount the engine ventilation line (3) on the cylinder head cover.
- Tighten down screws (1)
.TIGHTENING TORQUE SPECIFICATIONS
Engine ventilation line screw Tightening torque 10 Nm - Connect the engine ventilation line (3) to the clean air pipe and lock the lock (2) .
- Replace the intake pipe (1)
of crankcase ventilation.
- Connect the intake pipe of the crankcase ventilation (1)
to the right cylinder head cover and audibly lock.