Installing the left engine ventilation line
WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.
- Check the sealing rings (1)
of the engine ventilation line (2)
for correct placement and for damage, and replace if necessary.
- Mount the engine ventilation line (4) on the cylinder head cover.
- Tighten down screws (1)
.TIGHTENING TORQUE SPECIFICATIONS
Engine ventilation line screw Tightening torque 10 Nm - Connect the engine ventilation line (4) to the clean air pipe and lock the lock (2) .
- Connect the engine ventilation line (4) to the intake pipe of the crankcase ventilation and lock the lock (3) .