Installing the intake pipe of crankcase ventilation
WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.
- Feed in and install the intake pipe (1)
of the crankcase ventilation
- Connect and lock the intake pipe (1)
of the crankcase ventilation.
The intake pipe (1) of the crankcase ventilation must engage audibly.
- Connect and lock the Intake pipe (1)
of the crankcase ventilation.
The intake pipe (1) of the crankcase ventilation must engage audibly.
- Clip in the hose support (1)
of the intake pipe (2)
.