Install heat shield, top

WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.

Install top heat shield (2) .

Tighten down screws (1) .

TIGHTENING TORQUE SPECIFICATIONS

Heat protection plate
M6x16
	tightening torque	10 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Install holder (4) .

Tighten down screws (3) .

TIGHTENING TORQUE SPECIFICATIONS

Holder control sensor cable to the cylinder head cover
M6x16
	tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Secure cable to the clamp (2) .
Pin up connector (1) and lock audibly.