Checking the camber
WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.
Check
- Check camber with wheel alignment.
Desired state
- Camber within the tolerance.
Result
» Camber below the tolerance.
Measure
- Replace the upper wishbone with an upper wishbone that is more positive than the previously installed upper wishbone.
Check
- Check camber with wheel alignment.
Result
» Camber above the tolerance.
Measure
- Replace the upper wishbone with an upper wishbone that is more negative than the previously installed upper wishbone.