Installing the clean air pipe and the resonator

• Insert the clean air pipe (4) and connect it to the exhaust turbocharger.
• Lock the clamp (2) audibly on the exhaust turbocharger.
• Insert the resonator (1) into the rubber mount and fasten.
• Connect tank vent line (3) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock audibly.
• Connect connectors (2) and lock audibly.
• Fasten the cable with the cable bracket (3) to the engine ventilation line.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect engine ventilation line (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE INTAKE FILTER HOUSING (TENSION STRUT REMOVED ON SHOCK TOWER) .
• Refer to INSTALLING THE TENSION STRUT ON THE RIGHT SHOCK TOWER .
• Refer to INSTALLING ACOUSTIC COVER .