Remove engine vent line of cylinders 1 to 4
Prerequisite
- Ignition is switched off.
WARNING:
Hot surfaces
.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
Preliminary work
- Refer to REMOVING THE ACOUSTIC COVER .
- Refer to REMOVING RIGHT INTAKE SILENCER HOUSING .
- Refer to REMOVING THE RIGHT INTAKE SILENCER BRACKET .
- Undo screws (1) on the engine vent line (2).
- Unlock the retaining clip (1) upwards using a suitable screwdriver.
- Slide engine ventilation line (2) downwards to the side.
- Feed out the engine ventilation line (2) and remove.