LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2021 >> X5 xDrive45e >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - General/Mounting/Compression Check/Cylinder Head - Repair - X5 (G05) >> 11 12 Cylinder Head With Lid >> 11 12 070 Remove and install/replace acoustic cover (X5 xDrive 40i, 2019-, X5 sDrive 40i, 2020-) >> Installing acoustic cover

Installing acoustic cover

NOTE: RISK OF DAMAGE 
Damage to the acoustic cover/design cover  .
Jerky movements during disassembly and application of excessive force during installation may result in breakage of the acoustic cover/design cover  .
  • Disassemble or mount the acoustic cover/design cover carefully.
  • Disassemble or mount snap-lock couplings of the ball pivots one after the other.
  • Disassemble or mount the acoustic cover/design cover only at temperatures > 20°C.
  • Use only distilled water as an auxiliary material during installation, no lubricants.
G14363120Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals