17 00 COOLING, TEST (X5 xDrive 50i, X5 M50i 2019-)
17 00 TECHNICAL DATA OVERVIEW
| Coolant level | ||
| Overfill quantity of coolant (above the maximum mark) In the high-temperature expansion tank | + 200 ml | |
| Overfill quantity of coolant (above the maximum mark) In the low-temperature expansion tank (If Installed) | + 100 ml | |
| Cooling system test pressure | ||
| Test pressure for cooling system (gauge pressure) | 1.5 bar | |
| Filling capacity of high-temperature coolant circuit G05/G06 N63B144M3 N63B44T3 | ||
| N63B44M3/N63B44T3 | 12.6 l | |
| N63B44M3/N63B44T3 (SA823) | 13.6 l | |
| Low-temperature coolant circuit filling capacity G05/G07 | ||
| N63B44M3/N63B44T3 | 5.4 l | |
| Opening pressure of coolant seal cover | ||
| Pressure relief valve opens when the pressure exceeds the ambient pressure. | min. 2.0 bar | |
| Electric changeover valve must open at latest when the pressure is lower than the ambient pressure | max. 0.1 bar | |
| Test conditions for coolant level | ||
| Coolant must be cooled down | ||