11 65 CHARGER WITH CONTROL (X5 xDrive50i, 2019)
11 65 TIGHTENING TORQUE OVERVIEW
| Exhaust turbocharger to exhaust manifold | ||
| V-ribbon clip Replace V-ribbon clip. |
tightening torque | 13 Nm |
| Heat protection plate | ||
| M6x16 | tightening torque | 10 Nm |
| Heat protection plate | ||
| M6x12 screw Replace screw. |
tightening torque | 10 Nm |
| Lock nut on wastegate valve controller to exhaust turbocharger | ||
| M6 | tightening torque | 6.6 ± 1 Nm |
| Oil return line at the exhaust turbocharger | ||
| M6x16 Replace screws. |
Joining torque | 5 Nm |
| Angle of rotation | 60° | |
| Wastegate valve controller to exhaust turbocharger | ||
| tightening torque | 2 ± 0.5 Nm | |
| Wastegate valve controller to exhaust turbocharger | ||
| M4x12 | tightening torque | 2±0.3 Nm |