11 21 CRANKSHAFT WITH BEARING (X5 xDrive 40i, X5 sDrive 40i, X5 xDrive 45e 2019-)
11 21 CRANKSHAFT AND BEARINGS - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Increment wheel on crankshaft | S54 | M510.9 | Replace screws Joining torque Torque angle |
5.0 Nm 45° |
| Increment wheel on crankshaft | M5 10.9 | Replace screws | 13 Nm | |
| Increment wheel on crankshaft | M5 8.8 | Replace screws | 5.5 Nm |