11 11 ENGINE BLOCK (X5 xDrive 50i, X5 M50i 2019-)
11 11 TIGHTENING TORQUE OVERVIEW
| Angled screw connection to crankcase | ||
| M8x37 flat-head screw/spacer bolt/spacer screw | Joining torque | 10 Nm |
| Angle of rotation | 45° | |
| Bearing cap to crankcase (ASA (ASA) collar screw) | ||
| M11x99 Replace screws. Screw in hand-tight. |
Joining torque | 20 Nm |
| Angle of rotation | 125° | |
| Bearing cap to crankcase (ASA collar screw 10.9) | ||
| M8X70 Replace screw. |
Joining torque | 10 Nm |
| Angle of rotation | 63° | |