Install the optional equipment system (SAS)

• Connect connector (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the optional equipment system (SAS) (3).
• Replace the plastic nuts (1) and (2).

  Parts  : Plastic nuts

• Install the nuts (1) and (2) and tighten.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .
• Refer to INSTALLING THE FRONT DOOR SILL COVER STRIP .
• Refer to PROGRAM/ENCODE THE OPTIONAL EQUIPMENT SYSTEM (SAS) .