Removing the front underbody protection
NOTE:
TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment.
Different variants may be installed depending on the vehicle equipment.
- Remove screws (arrows).
- Feed out and remove the front underbody protection (1).
Removing the front skid plate
NOTE:
The following step(s) must be performed if the listed component(s) is/are installed.
NOTE:
TECHNICAL INFORMATION
Secure component against falling.
Secure component against falling.
- Remove screws (arrows).
- Loosen screws (1) and (2).
- Feed out and remove the front skid plate.