Replacing gutter strip on the windshield

• Paint the gutter strip trim before it is mounted.
• Remove the lugs (1) after painting.
• Clean the adhesive area (2) with the cleaning agent.

CONSUMABLE SPECIFICATIONS

Cleaning agent R2

500 ml

83190417324

Courtesy of BMW OF NORTH AMERICA, INC.

• Remove protective film (1).
• Affix a double-sided adhesive tape (2) over the entire length of the existing adhesive tape to ensure an adequate adhesion.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove the protective film on the upper end a little (approx. 5 cm).
• Position the support (1) as shown flush on the trim (2), start at the upper end of the support (1).
• Insert the support (1) at an angle in the trim (2) and align it correctly.
• Detach the protective film completely and press down the support (1) with the trim (2) firmly with the hand over the entire length.

Courtesy of BMW OF NORTH AMERICA, INC.