Install luggage compartment floor covering

Installing front luggage compartment floor trim panel 

• Check the clips (1) for damage and availability.

  Damaged or missing clips (1) must be replaced.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install luggage compartment floor covering (1) and engage with the clips (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

  Install the rear luggage compartment floor covering 

• Position luggage compartment floor covering (2) correctly and lock on the handle (3).
• Tighten the screws and close the covers (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Luggage compartment floor covering on holder
  Oval-head screw	Tightening torque	15 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Lift the luggage compartment floor covering.
• Slide the clamp (1) back from the removal position (2) again.
• Insert the gas pressure spring (3) onto the ball head and lock.