Remove the ornamental grille of the bumper cover laterally
NOTE:
RISK OF DAMAGE
Mechanical effects .
Paint damage .
Mechanical effects .
Paint damage .
- Mask those working areas at risk with yellow plastic adhesive tape.
- Remove and install heavy or bulky components with the aid of another person/other persons.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVE FRONT ORNAMENTAL GRILLE .
- Refer to PARTIALLY REMOVING THE FRONT LEFT AND RIGHT WHEEL ARCH TRIM .
- Refer to PARTIALLY REMOVING THE FRONT SECTION OF THE FRONT WHEEL ARCH COVER ON THE LEFT AND RIGHT .
- Refer to REMOVING THE ULTRASONIC SENSOR AT THE FRONT LEFT .
- Refer to REMOVE FRONT BUMPER COVER .
- Refer to REMOVING FOG LAMP HOLDERS .
NOTE:
Description is for left component only. Procedure on the right side is identical.
- G05/G07 only:
- Release the trim (1) at the detents (arrows) and remove.
- Detach and remove the ornamental grille (1) from the detents (arrows).