Installing the rear wheel arch trim

NOTE: TECHNICAL INFORMATION
To ensure optimal bonding, the bonding surfaces on the inner side of the wheel arch trim panels must not be painted!
You must apply the adhesive pad (two-sided adhesive tape) to the wheel arch trim panel before painting the wheel arch trim panel.

Remove the adhesive residues on the bonding surface (1).
Clean the bonding surface (1) with solvent cleaner R2.

CONSUMABLE SPECIFICATIONS

Cleaning agent R2

500 ml

83190417324

Adhere to the air drying time of 2 min.
Detach the protective film from the adhesive pad (2) (double-sided adhesive tape).

Courtesy of BMW OF NORTH AMERICA, INC.
Position the wheel arch trim (3), engage at the detents (4) and press firmly.