Installing the Bowden cable of the front hood locks

• Install the Bowden cable bracket (2) together with the Bowden cables.
• Attach the Bowden cable (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in the Bowden cable bracket (1) into the body.
• Close the lid (2) and engage with the retaining lugs (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE LEFT AND RIGHT BONNET LOCK .
• Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT AT TOP LEFT , and INSTALL THE COVER IN THE ENGINE COMPARTMENT ON THE TOP RIGHT .