12 52 PLUG CONNECTIONS, TERMINALS, LOOSE PARTS (X5 M50i, 2020-)
12 52 TIGHTENING TORQUE OVERVIEW
| Cable duct to cylinder head cover/cylinder head | ||
| M6 screw | tightening torque | 10 Nm |
| Ground cable on cylinder head cover/ground pin | ||
| Nut M5 | tightening torque | 4.6 Nm |
| Ground cable to hold-down device | ||
| Nuts | Tightening torque | 5.5 Nm |
| Ground cable to transmission | ||
| tightening torque | 8 Nm | |
| Holder to starter motor | ||
| M6x14 | tightening torque | 10 Nm |