Installing the side window (protective glass)
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Carefully install the side window (2).
- Put a drop of screw locking agent on the thread of every screw (1) before screwing.
ADHESIVE SPECIFICATIONS
| Screw lock Loctite Stick 243, medium strength | 10 ml, Bottle | 83192210339 |
- Tighten the screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Side window (protective glass) to the body | ||
|---|---|---|
| Hexagon screw M8x20 | tightening torque | 35 Nm |
Follow-up work
- Refer to INSTALLING TRIM PANEL OF LUGGAGE COMPARTMENT .
- Refer to INSTALLING THE SAFETY PARTITION WALL (REAR SHELF) .
- Refer to INSTALLING D-PILLAR TRIM PANEL .
- Refer to INSTALLING C-PILLAR TRIM PANEL .
- Refer to INSTALLING THE BOTTOM C-PILLAR TRIM PANEL .
- Refer to INSTALLING BACKREST SIDE SECTION .