Installing transmission cross member

Install transmission cross-member.
Replace the screw (1).
Parts: Screw

Tighten down screw (1).

TIGHTENING TORQUE SPECIFICATIONS

Transmission cross member to rubber mounts
M12	tightening torque	100 Nm

G14472947

Courtesy of BMW OF NORTH AMERICA, INC.

Replace screws (2).
Parts: Screws

Tighten down screws (2).

TIGHTENING TORQUE SPECIFICATIONS

Transmission cross member to body
M8	tightening torque	19 Nm

Remove the transmission jack.

Position transmission cross member (2).

Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Transmission cross member to body
M8	tightening torque	19 Nm

Remove the transmission jack.

G14472948

Courtesy of BMW OF NORTH AMERICA, INC.