Removing the intake pipe the engine ventilation line

WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.

Precondition

Ignition is switched off.

WARNING: Hot surfaces .
Risk of burning!

Perform all work only on components that have cooled down.

WARNING: Hot fluids .
Risk of scalding!

Conduct all work in the vehicle wearing appropriate personal protective equipment only.

Preliminary work

Refer to REMOVING THE ACOUSTIC COVER .
Refer to REMOVING RIGHT INTAKE SILENCER HOUSING .
Refer to REMOVING THE RIGHT INTAKE SILENCER BRACKET .
Refer to REMOVING THE SOUND INSULATION OF INJECTORS ON RIGHT .

Remove retaining clip (1).
Feed out and remove the intake pipe (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Unclip the intake pipe (1) from the holder in the area (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock the retaining clip (1) with a suitable screwdriver.
Remove the intake pipe (2) in an upwards direction.

Courtesy of BMW OF NORTH AMERICA, INC.