Remove the right rear torsion strut where required

WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.

Removing the undershield (tank cover) at right

NOTE: Description is for left component only. Procedure on the right side is identical.

Removing the undershield (tank cover)

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Unscrew all bolts and nuts (arrows).
Remove the underbody planking (1) .

Courtesy of BMW OF NORTH AMERICA, INC.

Removing the right rear tension strut

NOTE: Description is for left component only. Procedure on the right side is identical.

Removing the rear tension strut

NOTE: TECHNICAL INFORMATION
Driving without the strut brace/front-end strut or tension strut is not permitted.
Unscrew the bolts (1) and the nut (2) .
Remove tension strut (3) .

Courtesy of BMW OF NORTH AMERICA, INC.

If it is a dual-branch exhaust system: Removing the rear left tension strut

NOTE: TECHNICAL INFORMATION
Driving without torsion strut is prohibited.

Removing the undershield (tank cover)

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
Unscrew all bolts and nuts (arrows).
Remove the underbody planking (1) .

Courtesy of BMW OF NORTH AMERICA, INC.

Removing the rear tension strut

NOTE: TECHNICAL INFORMATION
Driving without the strut brace/front-end strut or tension strut is not permitted.
Unscrew the bolts (1) and the nut (2) .
Remove tension strut (3) .

Courtesy of BMW OF NORTH AMERICA, INC.