Removing the cylinder head from the assembly jig
WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Heavy component
.
Heavy components can lead to injury or damage .
Heavy components can lead to injury or damage .
- Remove and install heavy components with the aid of another person/other persons.
- Loosen screw (2) .
- Feed out rod (1)
in arrow direction
and set aside.
- Release the screws (1) from the special tool 0 494 150 (11 9 440)
.
- Stage the special tool (workshop crane) 2 220 718
.
- Prepare the special tool 0 490 567 (11 0 020)
.
- Insert and position special tool 0 490 567 (11 0 020) on the cylinder head (1) .
- Position the workshop crane 2 220 718
and connect it to special tool 0 490 567 (11 0 020)
.
- Detach the cylinder head (1) with the workshop crane 2 220 718 and special tool 0 490 567 (11 0 020) from the device (2), guide it out and remove .