Adjusting the eccentric shaft to the minimum lift (cylinder head removed)

WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.

Adjust the eccentric shaft (3) slowly to the minimum lift with the help of the servomotor using a standard Allen wrench (1) with 4 mm in arrow direction.
Ensure that the marking (2) on the eccentric shaft (3) faces up.

Courtesy of BMW OF NORTH AMERICA, INC.

Adjust the eccentric shaft (3) slowly to the minimum lift with the help of the servomotor using a standard Allen wrench (1) with 4 mm in arrow direction.
Ensure that the marking (2) on the eccentric shaft (3) faces up.

Courtesy of BMW OF NORTH AMERICA, INC.