Disconnecting the connector from vertical acceleration sensor on the left and right

WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Description is for left component only. Procedure on the right side is identical.

Disconnecting the connector of the vertical acceleration sensor

NOTE: The following step(s) must be performed if the listed component(s) is/are installed.

Unlock plug connection (1) and disconnect.
Release cable from holders (2) .

Courtesy of BMW OF NORTH AMERICA, INC.