Remove lower oil pan section

WARNING: Hot fluids .
Risk of scalding!

Conduct all work in the vehicle wearing appropriate personal protective equipment only.

NOTE: RISK OF DAMAGE
Engine damage caused by excessively filling the engine with motor oil. Filling an excessive quantity of motor oil may cause engine damage .

Observe the exact motor oil filling capacity.
Allow engine oil to drip off when draining.

NOTE: TECHNICAL INFORMATION
Make sure the vehicle is operating temperature for engine oil service (engine oil temperature > 70°C).

Preliminary work

Refer to RELEASING THE OIL DRAIN PLUG .
Refer to REMOVING THE STIFFENING PLATE .

Uninstall cable holder (1).
Unlock plug connection (2) and disconnect.

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws in area (1).
Secure the oil pan from falling down and remove.

Courtesy of BMW OF NORTH AMERICA, INC.