11 21 CRANKSHAFT AND BEARINGS (X5 xDrive 50i, X5 M50i 2019-)
11 21 CRANKSHAFT AND BEARINGS - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Increment wheel on crankshaft | S54 | M5 10.9 | Replace screws Joining torque Torque angle |
5.0 Nm 45° |
| Increment wheel on crankshaft | M5 10.9 | Replace screws | 13 Nm | |
| Increment wheel on crankshaft | M5 8.8 | Replace screws | 5.5 Nm |
11 21 TIGHTENING TORQUE OVERVIEW
| Threaded support bushing | ||
| Threaded support bushing | Tightening torque | 6 Nm |