Install EMF actuator
- EMF actuator (l) Carefully fit controller drive until gearing engage and EMF actuator rests flush on brake caliper.
- If necessary, turn the EMF actuator slightly until the bore and the screw thread are aligned.
- Attach the holder (4) and position and tighten the bolts (3).
TIGHTENING TORQUE SPECIFICATIONS
| EMF actuator to brake caliper | ||
|---|---|---|
| Replace screws. | tightening torque | 12 Nm |
- Connect plug (1).
- Attach the brake hose (2) in the holder.
Follow-up work