Mount rear brake guard plate
- Install brake guard plate (2).
- Replace screws (1).
Parts : Screws
- Insert screws (1) and tighten.
Follow-up work
- Refer to GREASE BRAKE PADS, BRAKE ANCHOR PLATE AND BRAKE CALIPER WITH BRAKE PAD PASTE .
- Refer to INSTALL REAR BRAKE PADS .
- Refer to PLACING BRAKE PADS ON BRAKE DISC/COMMISSIONING .
- Refer to INSTALLING THE REAR BRAKE PAD WEAR SENSOR .
- Refer to INSTALLING THE REAR LEFT AND RIGHT WHEEL .
- Refer to START-UP OR BEDDING IN BREAK-IN OF NEW BRAKE PADS AND BLADES (REAR BRAKE) .