Connect diagnostic system/Brake bleeding procedure service function
NOTE:
TECHNICAL INFORMATION
Before work is first performed on the DSCi brake (integrated brake), the web-based training "DSCi" should first be successfully completed. To do this, the web-based training "DSCi" must be started in your Learning Management System (TMSi).
Before work is first performed on the DSCi brake (integrated brake), the web-based training "DSCi" should first be successfully completed. To do this, the web-based training "DSCi" must be started in your Learning Management System (TMSi).
NOTE:
TECHNICAL INFORMATION
Use only BMW-approved brake fluids.
Use only BMW-approved brake fluids.
Preliminary work
- Refer to REMOVING THE COVER OF THE ENGINE COMPARTMENT AT THE REAR LEFT .
- Refer to CONNECTING THE BLEEDER UNIT FOR THE BRAKE FLUID .
- Connect diagnostic system:
- Service functions
- Chassis
- Traction control systems
- Brake bleeding procedure
- Work through the instructions in the service function in sequence .
Follow-up work