Supplying The New Parts Required
WARNING:
DANGER
High-voltage system .
The high-voltage system operates on the basis of hazardous, electrical voltage and high currents. Mortal hazard through electric shock!
High-voltage system .
The high-voltage system operates on the basis of hazardous, electrical voltage and high currents. Mortal hazard through electric shock!
- All work on the high-voltage system may only be carried out by specially trained and technically experienced personnel.
- For additional information see 6100... SAFETY INSTRUCTIONS ON HANDLING HYBRID CARS (ALL X5 MODELS, 2019-2022) .
- For additional information see 6125... NOTES ON REPAIR OF HIGH-VOLTAGE BATTERY UNIT (ALL X5 MODELS, 2019-2022) .
NOTE:
TECHNICAL INFORMATION
- Observe the procedure for repair stage 2.
For additional information see 4100... REPAIR TECHNIQUES, REPAIR STAGE 2 (ALL X5 MODELS, 2019-2022) .
- For information about stripping and rebuilding operations, refer to the surrounding text in the AIR. See the FRU number.
Preliminary work
- Refer to REMOVE FLAP IN LUGGAGE COMPARTMENT TRIM PANEL ON RIGHT .
- Refer to DE-ENERGIZE THE HIGH-VOLTAGE SYSTEM .
- Refer to CHECK THAT NO VOLTAGE IS APPLIED .
Further information is available.
- Prepare the following new parts (see applicable BMW Parts Catalog):
Roof outer skin (1)
NOTE: TECHNICAL INFORMATION
For additional information see 4100... OVERVIEW OF CONSUMABLES (ELECTRONIC PARTS CATALOG) (ALL X5 MODELS, 2019-2022) . - Supply the following consumables:
Material Quantity Adhesive K5 (50 ml) 1 Adhesive K5 (195 ml) 1 Punch rivet N5 30 T-bolt 20 Cleaning agent R1 1 Cleaning agent R2 1 EMC screw 2 Sealing compound D1 1 Sealing compound D2 1 NOTE: TECHNICAL INFORMATION
Store adhesive at room temperature.
Adhere to adhesive processing temperature of 15-28°C without fail.
Before installation: Store roof outer skin and vehicle for at least 12 hours at room temperature (17°C to 35°C). - Provide additionally required materials from workshop resources: 6 x screws (M6 x 20), 6 x nuts (M6), 12 x washers.