Install Wheel Arch

Further information is available.

• Preclean all bonding surfaces with solvent cleaner R2.
  CONSUMABLE SPECIFICATIONS
  
  

  Cleaning agent R2

  500 ml

  83190417324

• Clean all bonding surfaces with solvent cleaner R1.
  CONSUMABLE SPECIFICATIONS
  
  

  Cleaning agent R1

  100 ml, Bottle

  83192211217

• Apply adhesive K1 to bonding surfaces.
  ADHESIVE SPECIFICATIONS
  
  

  Body adhesive K1

  195 ml

  83190413015

• Install the new part with an alignment bracket or a universal fixture.
• Rivet the new part in area (1) with blind rivets N2.
  CONSUMABLE SPECIFICATIONS
  
  

  Blind rivet N2	83190301419
  Ø 6.5 mm; clamping area 4.8-6.8 mm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Rivet new parts in the areas (1) and (2) with blind rivets N2.
  CONSUMABLE SPECIFICATIONS
  
  

  Blind rivet N2	83190301419
  Ø 6.5 mm; clamping area 4.8-6.8 mm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Rivet the new part in area (1) with blind rivets N1.
  CONSUMABLE SPECIFICATIONS
  
  

  Blind rivet N1	83190301414
  Ø 6.5 mm; clamping area 2.8-4.8 mm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Rivet the new part in area (1) with blind rivets N1.
  CONSUMABLE SPECIFICATIONS
  
  

  Blind rivet N1	83190301414
  Ø 6.5 mm; clamping area 2.8-4.8 mm

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: TECHNICAL INFORMATION 
  For additional information see 4100... INSTALLING CAVITY SEALING (NOT EXPANDED) (ALL X5 MODELS, 2019-2022) .
• Apply sealant D1 to the cavity sealing (1). Install the cavity sealing (1) on the new part.
  CONSUMABLE SPECIFICATIONS
  
  

  Sealant D1 (seam sealing)

  310 ml

  83422409985

  Courtesy of BMW OF NORTH AMERICA, INC.

• Preclean all bonding surfaces with solvent cleaner R2.
  CONSUMABLE SPECIFICATIONS
  
  

  Cleaning agent R2

  500 ml

  83190417324

• Clean all bonding surfaces with solvent cleaner R1.
  CONSUMABLE SPECIFICATIONS
  
  

  Cleaning agent R1

  100 ml, Bottle

  83192211217

• Apply adhesive K1 to bonding surfaces.
  ADHESIVE SPECIFICATIONS
  
  

  Body adhesive K1

  195 ml

  83190413015

• Install the new part with an alignment bracket or a universal fixture.
• During installation, ensure that sufficient adhesive has been applied to all bonding surfaces.
• Also make sure that there is enough adhesive in area (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Rivet new parts in the areas (1) and (2) with blind rivets.

  In area (1), use blind rivets N2.

  CONSUMABLE SPECIFICATIONS
  
  

  Blind rivet N2	83190301419
  Ø 6.5 mm; clamping area 4.8-6.8 mm

  Courtesy of BMW OF NORTH AMERICA, INC.

• In area (2), use 2x blind rivets N1. Only set the front two blind rivets (3).
  CONSUMABLE SPECIFICATIONS
  
  

  Blind rivet N1	83190301414
  Ø 6.5 mm; clamping area 2.8-4.8 mm

• Rivet the new parts in areas (1) and (2) with punch rivets N5.

  The number and position of the punch rivets can be found on the series part.

  CONSUMABLE SPECIFICATIONS
  
  

  Punch rivet N5	83192158079
  Ø 5 mm; 5 mm long

  Courtesy of BMW OF NORTH AMERICA, INC.

• Pre-clean the bonding surface (1) with solvent cleaner R2 and clean with solvent cleaner R1.
• Apply adhesive K1 to the bonding surface (1) and install the new part.
• Rivet the new part in areas (2) to (4) with blind rivets.

  Area	Description
  2	N7
  3	N2
  4	N7

  Courtesy of BMW OF NORTH AMERICA, INC.

  CONSUMABLE SPECIFICATIONS
  
  

  Blind rivet N7	83192240352
  Ø 6.5 mm; clamping area 1.5 - 3.5 mm

  CONSUMABLE SPECIFICATIONS
  
  

  Blind rivet N2	83190301419
  Ø 6.5 mm; clamping area 4.8-6.8 mm

• In areas (1) to (3), rivet the new part with punch rivets N5.

  Area	Number
  1	4
  2	4
  3	3

  CONSUMABLE SPECIFICATIONS
  
  

  Punch rivet N5	83192158079
  Ø 5 mm mm; 5 mm long

  Courtesy of BMW OF NORTH AMERICA, INC.

• Weld the new part in area (1).

  In this process, avoid excessively high heat input at the adjacent bonded rivet areas (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

  Installing the EMC screw 

• Drill the hole with a diameter of 4.2 mm after the adhesive completely hardens.
• Screw in the EMC screw.
• Seal the EMC screw with the sealant.
  CONSUMABLE SPECIFICATIONS
  
  

  Sealant D1 (seam sealing)

  310ml

  83422409985

• Mount two EMC screws in areas (1).
  CONSUMABLE SPECIFICATIONS
  
  

  screw	83190301639
  EMC screw, SF Plus, M5x15

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mount two EMC screws in areas (1).
  CONSUMABLE SPECIFICATIONS
  
  

  screw	83190301639
  EMC screw, SF Plus, M5x15

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to Cut the threads
• Refer to ACTIVATE HIGH-VOLTAGE SYSTEM .
• Refer to INSTALL FLAP IN RIGHT LUGGAGE COMPARTMENT TRIM PANEL .