Installing the roller cover for luggage compartment (electrical)

Prerequisite

Electrical roller cover for luggage compartment has been raised.

NOTE: Perform the steps on the right and left side.

TIGHTENING TORQUE SPECIFICATIONS

Roller cover for luggage compartment to drive unit
screw	Tightening torque	2.0 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Install cover (1).
Engage the guide pin (1) in the guide rail (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Carefully pull the roller cover for luggage compartment (1) to the rear and snap into place in the driver (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Check whether the roller cover for luggage compartment (1) is correctly engaged in the driver (2).

Courtesy of BMW OF NORTH AMERICA, INC.